Think about it: without your tires, moving over the roads of Dartmouth, New Bedford, and Fall River wouldn’t be quite so effortless. However, keeping your tires healthy is as simple as providing them with plenty of maintenance, which includes routine tire rotations.
By having your tires rotated every 5,000 miles or so, you’ll enhance their grip on the asphalt and help them perform at their best.
However, just how is this service done? Well, the team of automotive experts at Dartmouth Nissan is here to provide you with all the necessary steps with this how to rotate tires guide. Let’s check it out!
How to Rotate Tires: The Basics
Before we review the steps of how to rotate your tires, let’s first go over the tools you’ll need to get the job done. Here’s what you should have in your toolbox to complete this service:
- Cotton rags
- Wire brush
- Car jack
- Wheel chocks
- Penetrating oil
- Spray wheel cleaner
- Jack stands
- Lug wrench
Step-By-Step Guide to Your Tire Rotation
Now that you’re all set to learn how to rotate tires, read through these steps once before beginning, so you’ll have a basic idea of what to do and can check our instructions as needed throughout the process.
Secure Your Car
First, activate your vehicle’s parking brake for added security. If you’d like to be extra careful, feel free to place bricks behind the rear wheels. By doing so, you can focus on the steps of this procedure without worrying about your automobile moving.
Loosen the Lug Nuts
Before you jack up your car, loosen the lug nuts with your lug wrench. Doing this prior to jacking up your vehicle makes the lug nuts easier to remove.
Determine the Rotation Direction
The type of tread on your tires will determine which direction you should be rotating them. For example, if your tires have a non-directional tread pattern, which is most common, you’ll want to use the cross pattern.
However, if you own tires that have directional tire tread, they’ll be rotated by swapping the front tires and back tires on each corresponding side.
Jack Up Your Car
Once you’ve figured out which type of rotation your tires need, jack up one corner of your vehicle. Again, the corner you lift first will depend on the rotation pattern, so make sure to determine beforehand. Then, place the jack stand underneath and lower the jack.
Remove the Wheel
Take the first wheel off your automobile by using your lug wrench. After you’ve removed the tire, set the lug nuts aside for later use. Next, repeat those steps on the wheel that’s located where you’ll move the first wheel. Follow this guide for non-directional tires:
- Left Front Tire moves to Right Rear
- Right Front Tire moves to Left Rear
- Left Rear Tire moves to Left Front
- Right Rear Tire moves to Right Front
If you’re in the mood for some extra care, use a wire brush and wheel cleaner to scrub off any brake dust. By doing so, you’ll keep the wheel rims in good condition.
Once you’ve swapped the tires to their appropriate positions, tighten the lug nuts using a torque wrench. To ensure that you’ve secured the lug nuts properly, check your Owner’s Manual.
Congrats! All you have to do now is lower your car from the jack stands. Feel free to tighten the lug nuts more with a lug wrench once your vehicle is back on the ground.
Make sure that you secure the lug nuts by working in a star pattern. By doing so, you’ll avoid any side effects caused by lug nuts that aren’t tightened evenly.
How to Rotate Tires: Schedule Your Appointment Today!
At Dartmouth Nissan, we’re committed to providing drivers near Dartmouth, New Bedford, and Fall River with the tips and tricks you need to keep your automobile healthy.
If you’re not entirely sure how to rotate tires or need some advice, don’t hesitate to consult the experienced technicians at our state-of-the-art service center. With their assistance, you’ll know that your tire rotation was made with attention-to-detail and care.
To reserve your visit to our repair facility, simply visit our showroom, give us a call, or schedule your appointment online today!